•PP (Polypropylene) filament for use with 3D printers – high heat resistance yet soft
•Manufactured to very tight tolerances (±0.05mm diameter) using the highest quality materials to ensure consistent feeding and stable prints
•Custom spool designed for strength, uniform performance and trouble-free feeding
•Filaments packaged in vacuum-sealed bag, with desiccant to prevent introduction of dust and moisture.
•Compatible with most commercially available non-cartridge based 3D printers.
•For best performance, an extrusion temperature of 220°C is recommended.
•Heated build platform temperature: 100°C recommended.
•Double-sided adhesive tape recommended for bed.
•1-Year Limited Warranty
|
Diameter accuracy: |
1.75 ± 0.05 mm |
|
Extrusion temperature: |
220 °C |
|
Bed temperature: |
100 °C |
|
Material Net Weight: |
0.5 kg |
|
Filament Length: |
233 m |
|
Melt Flow Rate @ 230 °C, 21.1N: |
20.0 g/(10 minutes) |
|
Density: |
0.89 g/cm3 |
|
Viscat soltening temperature: |
115 °C |
|
Durometer Hardness: |
Shore D55 |
|
Flexural Strength: |
14 MPa |
|
Flexural Modulus: |
350 MPa |
|
Impact Strength (Charpy): |
10 KJ/m2 |
|
Tensile Strength: |
14 MPa |
|
Tensile Elongation: |
> 200% |
© 2020 Gadgetw@re gadget specialist. All Rights Reserved.